Camco Vortex 8 Navigation Guide Manuel d'utilisateur télécharger pdf

V O RTEX

S I LV E R S E R I E S

1 2

USER MANUAL

VORTEX SILVER SERIES V8

P.14

4.1 Screen User Interface

Due to the advanced approach with the absence of any control knobs or

switches, control of all parameters is done via the screen user interface.

4.1.1 Screen User Interface Elements

The screen user interface consists of four buttons and two selection bars.

1 MENU button ( )

- touch to leave the current sreen without changes

- Hot key: touch and hold (≈2 s) to navigate to the Signal Monitor

2 ENTER button

( )

- navigate to the selected menu item, confirm changes

3 A button ( )

- select channel A

4 B button ( )

- select channel B

5 Horizontal Selection Bar (HSB)

- increase/decrease values

6 Vertical Selection Bar (VSB)

- scrolls through menu items

4.1.2 Handle the Selection Bars

-Tip the VSB at the upper half to scroll upwards.

-Tip the VSB at the lower half to scroll downwards.

-Tip the HSB at the left half to decrease values.

-Tip the HSB at the right half to increase values.

4 OPERATION

V O RT E X

S I LV E R S E R I E S

USER MANUAL

VORTEX SILVER SERIES V8

P.15

4.1.3 Hot key Functions

The Hot key Functions give you a quick access to important setting screens.

The Power Hot key is accessible from all menu levels and screens.

Power Off Hot key:

Touch and hold MENU and ENTER simultaneously (≈3 s).

Power Off screen will be displayed. Touching again MENU and ENTER

simultaneously will start Power Off-Sequence.

Level Attenuator Hot key (from monitor screens 3.1-3.4):

Touching the HSB opens the Level Attenuator Screen for a quick access

to level adjustments. After adjustment you can step back to the previous

screen by touching the MENU button.

Mute Hot key (from monitor screens 3.2-3.4):

Touching button A or button B let you directly jump to the Signal Monitor.

Here you can mute/unmute each channel directly by touching button A or

button B again. After adjustment you can step back to the previous screen

by touching the MENU button.

Signal Monitor Hot key

Touch and hold MENU (≈3 s) let you directly jump to the Signal Monitor.

You can step back to the previous screen by touching the MENU button.

4.2 Power On-Sequence

As soon as the V8 amplifer is connected to the mains power supply, it will

start the Power On-Sequence. The display will show the V8 logo followed

by the Power On-Screen.

This is the screen used to switch the amplifier on/off. Please touch MENU

and ENTER simultaneously to switch on the amplifier or touch any of the

touch-sensitive elements to activate the display backlight.

NOTE: Turning the Amplifier off does NOT disconnect the amplifier

from mains.

The switch initiates start-up by activating the current limiting function. As

soon as the power amplifier is connected to the mains power supply, a

voltage is supplied to both the line-filter and the fused input of the control-

lable rectifier. Disconnecting the amplifier from the main power supply can

only be achieved by physically separating the amplifier from the mains by

pulling the mains plug. The mains plug therefore has to be freely acces-

sible. Disconnect the mains plug from the mains during a lightning storm

or when the amplifier remains unused or unsupervised for a prolonged pe-

riod of time. Alternatively, you can disconnect the amplifier from the mains

via an external all-pole disconnection.

If a power cut occurs while the amplifier is switched on, it will restart auto-

matically once the power supply has been restored. All settings prior to the

loss of power will be maintained.

4 OPERATION

V O RT E X

S I LV E R S E R I E S

USER MANUAL

VORTEX SILVER SERIES V8

P.16

4.3 Indicators

Input Selection LED

Output Mode LED

Clip LED Channel A

Signal LED Channel A

Device Identifier LED

Clip LED Channel B

Signal LED Channel B

DSP LED

man

LED

4.3.1 Input Selection LED

The status of the bi-coloured (green/red) LED changes between off, green,

and red depending on the selected Input Selection (see 4.5.1).

LED is off - Analog Inputs active

LED lit green - Digital (U

man

) inputs active

LED lit red - If Digital with Analog Fallback is selected, the red

Input Mode LED indicates that one of the digital

inputs have failed and will be replaced by analog

backup signal.

4.3.2 Output Mode LED

The status of the bi-coloured (green/orange) LED changes between off,

green, and orange depending on the selected Output Mode (see 3.3 &

4.5.2).

LED is off - Dual Channel Operation

LED lit green - Mono Bridge Operation

LED lit orange - Parallel Mono Operation

4.3.3 Clip LED (Channel A/Channel B)

This LED indicates an overloading of the amplifier when the power output

level is too high.

4.3.4 Signal LED (Channel A/Channel B)

The green Signal LED is illuminated when the voltage level at the output

reaches approx. 4 V; this corresponds to a power of approx. 4 W over a

4 Ω resistor.

4.3.5 Device Identifier LED

This white coloured LED helps you to identify an amplifier in a large U

man

network. By activating the Identify Device function in U

man

software, the

Device Identifer LED of the corresponding amplifier will shine.

4.3.6 DSP LED

The green DSP LED is illuminated when the optional DSP-Board (see

www.camcoaudio.com for more information) is installed and routed into

the signal path.

4.3.7 U

man

LED

The green U

man

LED is illuminated when the amplifier is connected to a

man

network.

4 OPERATION

V8 Navigation Guide

version: 2010-11-04 (please visit www.camcoaudio.com for the latest version of this file)

Excerpt from the V8 User Manual. For more details, please consult the V8 User Manual or visit us on www.camcoaudio.com.

V8 Navigation Guide 1

Résumé du contenu

Page 1 - V8 Navigation Guide

V O RTEXS I LV E R S E R I E S341 256USER MANUALVORTEX SILVER SERIES V8P.144.1 Screen User InterfaceDue to the advanced approach with the absence of

Commentaires sur ces manuels

Pas de commentaire

Camco Vortex 8 Navigation Guide Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Récepteurs et amplificateurs Camco Vortex 8 Navigation Guide. Camco Vortex 8 Navigation Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Camco Vortex 8 Navigation Guide